Products
Surfaces subject to excessively heavy attack by mould etc. should be given a preliminary clean-down using a stiff brush or high pressure water spray.
Boracol 100RH can be applied by brush, roller, dipping or spraying. Boracol 100RH can be applied to dry or damp surfaces provided they are not saturated with water.
If the surface is very dry, the penetration of Boracol will be improved by wetting (but not soaking) the surface with water. Boracol 100RH may be applied as soon as the water has been absorbed into the surface.
Boracol 100RH, after correct application, will require at least 2 days to be effective against the attacking organisms. It is recommended that the surface is brushed to remove any dead material.
The effectiveness of Boracol 100RH will be enhanced if the applied surface is sealed with a water repellent / paint etc. Any sealing of the treated surface should only be carried out once it is dry
| Situation | Timber, concrete, brickwork, masonry, fibre cement, cement render and roofs. |
|---|---|
| Recommendation | Dependent on surface prorosity 160 - 500ml per square metre (2 - 6 square metres per litre) |
Clean brushes, rollers, application equipment with water.